News about the main topic Products & Technology

12.06.2019
The "Plug & Work" framework was presented for the first time at LIGNA 2019. Under the umbrella of EUMABOIS and VDMA, this project develops uniform communication interfaces for the wood processing industry on the basis of OPC UA.
01.12.2016
The working groups ISO/TC 39/SC 4/WG 1 and 2 will meet at the INRS in Paris for their next meeting from 28 February to 3 March 2017.
01.12.2016
The Working Group on Technology and Standardization will meet at the Weinig company on 7 December for its next meeting.
01.12.2016
The FPH ad hoc Marketing Working Group will meet for its second meeting on Monday, December 12, 2016.
01.12.2016
The first research project initiated by FPH on the topic of "Increasing the efficiency of chip collection in the machining of composite and wood materials as well as plastics" was approved. The duration of the project, which will be carried out at the Institute for Machine Tools at the University of Stuttgart, is 1.12.2016 to 30.11.2018.
01.12.2016
The FPH Advisory Board meets at the invitation of Weber on 22 March 2017 in Kronach for its 5th meeting.
01.12.2016
The AK Technik meets at the invitation of Weber on 22 and 23 February 2017 in Kronach for its 54th meeting.
10.02.2017
A good two years after the restructuring and renaming of the FPH as "Forschungsplattform Holzbearbeitungstechnologie e.V.", the development of the research platform can be regarded as completed: the first research projects are in progress or about to be approved, further projects have been applied for.
08.11.2017
With some delay the new edition of the EN 1870-6 on firewood circular sawing machines is planned with issue date February 2018. Compared to DIN EN 1870-6:2010-06, numerous changes have been made.
08.11.2017
This standard specifies the relevant requirements of Annex I of the EU Machinery Directive 2006/42/EC for machinery placed on the market for the first time in the European Economic Area (EEA) in order to facilitate proof of conformity with these requirements.
08.11.2017
This standard specifies the relevant requirements of Annex I of the EU Machinery Directive 2006/42/EC for machinery placed on the market for the first time in the European Economic Area (EEA) in order to facilitate proof of conformity with these requirements.
08.11.2017
This standard specifies the relevant requirements of Annex I of the EU Machinery Directive 2006/42/EC for machinery placed on the market for the first time in the European Economic Area (EEA) in order to facilitate proof of conformity with these requirements.
22.11.2017
The first three standards from the ISO 19085 series (Woodworking Machinery - Safety) were published by ISO with an issue date of July 2017.
20.05.2019
The European Federation of Woodworking Machinery Manufacturers, EUMABOIS, presents the results of the working group "OPC UA - Plug & Work" on the occasion of the LIGNA 2019 fair in Hanover.
Products & Technology
The VDMA Association of German Woodworking Machinery Manufacturers offers its member companies neutral support in the main areas of products and technology.